Blood gas syringes and capillary tubes 

Meet your blood sampling needs with our samplers, designed to facilitate reliable test results 

  • Download the Radiometer Pacific Sampler Catalogue
    I would like a copy of the Radiometer Sampler and Capillary Catalogue.
    Contact Info

    By submitting this form, I acknowledge that I have reviewed and understood the data privacy notice.

    All fields must be filled!

Syringes and capillary tubes are designed to reduce the risk of preanalytical errors

As blood gas specialists, we’re empowered to advance acute care diagnostics. From reducing the risk of preanalytical errors to providing a reliable blood gas test result, we ensure constant focus on supporting you and your patients.

Radiometer capillary tubes, aspirating and self-fill blood gas syringes are designed with various features that are intended to reduce the risk of preanalytical errors.



Furthermore, our products support the Patient Blood Management which is an evidence-based approach to optimizing the care of patients’ blood. This includes opportunities to minimize blood loss and avoid the inappropriate use of blood.

We’re committed to empowering you to take control of the blood sampling process. Discover a blood gas syringe or capillary tube that supports your blood sampling workflow.

Explore the syringes and capillary tube that can meet your needs


Aspirating syringe

Pre-barcoded aspirating syringe helps ensure correct patient-sample identification every time when using with a Radiometer blood gas analyzer with 1st Automatic.


Self-fill syringe

safePICO self-fill syringe is equiped with an integrated mixing ball and automatic mixing which enhances analytical quality through standardized mixing, without causing hemolysis.


Capillary tube

Our capillary tube is used for low-volume blood gas sampling, mainly on neonates.

Radiometer - specialists by bloodSpecialists by blood

The history of Radiometer as we know it today began in 1954 when Radiometer developed the world’s first commercially available blood gas analyzer. Since then, we have refined our blood gas testing knowledge and experience and continue to advance our acute care diagnostic solutions.

Minimizing preanalytical errors in blood gas testing

Increase patient care with proper sampling technique in the preanalytical phase


 

Hemolysis in blood samples

Learn more

 

Reducing hemolysis in blood samples

Hemolysis is the rupture of the red blood cells, and may happen during sample collection and the following process. The rupture causes the intracellular components of the destroyed red blood cells to be mixed with the plasma. Some of the components, e.g., potassium (K+), are more concentrated in the intracellular compartment than in the plasma phase. Therefore, the reported potassium result will be falsely high.

Clots in blood samples

Learn more

Clots in blood samples

Clots in the sample can potentially lead to blocking of the sample pathway on the analyzer and to inaccurate values.

Clots can be caused by:
  • Too low concentration of heparin in the sample
  • Lack of or insufficient mixing of the sample immediately after it has been collected

Air bubbles in the sample

Learn more

Air bubbles in the sample

Room air contamination of a blood gas sample may alter the values of the sample so that it no longer represents patient's status.

To minimize errors:

  • Visually inspect the sample for air bubbles
  • Expel any bubbles by gently tapping the sides of the syringe right after sampling and before mixing
  • Use arterial blood gas syringes with tip caps that are vented and will allow you to expel air and seal the syringe without getting in contact with blood

Needlestick injuries

Learn more

Needlestick injuries

Needlestick injury and unwanted contact with patient blood are daily risks for operators collecting blood gas samples.

To minimize risks

  • If available, use a safety device that limits the risk of contact with patient blood
  • Do not recap needles
  • If available, use a needle shield protection device when removal of needles
  • Ensure a dedicated procedure for operator safety is established and followed in your facility

Mix-up of patient samples

Learn more

Mix-up of patient samples

Incorrect or missing patient and sample IDs are some of the most frequent preanalytical errors occurring in blood gas testing with significant consequences for patient care, for healthcare management and for increasing costs that are often unaccounted for.

Preanalytical Handbook from Radiometer

Preanalytical blood gas handbook


Syringes and capillary tube used in your hospital

Intensive Care Unit

Make critical decisions in your ICU with our point-of-care testing (POCT) solution, combined with blood gas syringes.

Emergency Department

Point-of-care testing (POCT) can be an asset in the emergency department, helping to speed up diagnosis and treatment processes while reducing contingencies and process costs.

Neonatal Intensive Care Unit

In the NICU, the total syringe, blood gas and transcutaneous monitoring solution gives you detailed information on the neonate’s respiratory and metabolic status.

Related knowledge sources

Patient blood management

Patient Blood Management is an evidence-based approach to optimizing the care of patients’ blood. This includes opportunities to minimize blood loss and avoid the inappropriate use of blood.

How-to videos - guide to blood gas

Watch six educational videos to support you in understanding blood gas analysis.

Minimizing preanalytical errors

Learn more about the most common preanalytical errors and advice on how to prevent them.


MAPSSS-000871 R2

Cookies are used on this website

Use of cookies
Confirm your account with Radiometer

Please enter a valid email

CONTINUE
By submitting your e-mail you agree to the data policy notice
Radiometer is using Microsoft Azure Active Directory to authenticate customer access. If you are already registered you will be taken to Microsoft AD to sign in using your Microsoft AD credentials.
You are already registered
Radiometer is using Microsoft Azure AD to authenticate customer access. If you are already registered you will be taken to AZURE to sign in using your AZURE credentials.
Thank you

We will be sending an e-mail invitation to you shortly to sign in using Microsoft Azure AD.

Radiometer is using Microsoft Azure AD to authenticate customer access.
Sorry

It seems that your e-mail is not registered with us

Radiometer is using Microsoft Azure AD to authenticate customer access. If your e-mail is not registered with us please click CONTINUE and we will guide you through the sign-in process.
We have previously sent an invitation by e-mail

Please click "Get started" in the e-mail to complete the registration process

Radiometer is using Microsoft Azure AD to authenticate customer access.
Sorry

We were not able to process your request due to a communication error

Sorry

It seems this account has not been given access to the portal

Radiometer is using Microsoft AZURE Active Directory to authenticate users

Radiometer uses Azure AD to provide our customers and partners secure access to documents, resources, and other services on our customer portal.

If your organization is already using Azure AD you can use the same credentials to access Radiometer's customer portal.

Key benefits

       
  • Allow the use of existing Active Directory credentials
  •    
  • Single-sign on experience
  •    
  • Use same credentials to access future services    

Request access

You will receive an invitation to access our services via e-mail when your request  has been approved.

When you accept the invitation, and your organization is already using AZURE AD, you can use the same credentials to access Radiometer's customer portal. Otherwise, a one-time password will be sent via e-mail to sign in.